Back to the range

4-wire thermal actuator

The 4-wire thermal actuator is designed to automate the opening and closing of loops in hydronic radiant heating systems. Controlled by a zone controller, the actuator uses a thermal wax element with PTC heating to provide smooth and quiet operation. Its position indicator provides a visual indication of its status, while the auxiliary contact (end switch) confirms that the corresponding manifold loop is open. A return spring automatically returns the actuator to its initial position when power is removed.

Documents &
specification

Submittal Data Instructions

• Type: Normally closed (NC) – 4-wire with auxiliary contact
• Supply voltage: 24 VAC, 50/60 Hz
• Power consumption: 2 W
• Maximum current: 150 mA
• Travel time: 2 to 4 minutes
• Stroke: 3 mm
• Actuating force: 90 to 125 N
• Protection class: Class II (double insulation)
• Cable length: 950 ± 30 mm
• Housing material: PA66
• Enclosure rating: IP54
• Certifications: CE, TÜV SÜD

Related products

ACTUATOR FOR MANIFOLD AC24NC

The Calefactio 24V actuator is specifically designed to simplify the installation and start-up testing of radiant floor heating systems. Its manual blue head allows installers to easily open or close heating zones...

See this product

CALTHERM MEGA MANIFOLD

Calefactio’s stainless steel manifold kit is delivered pre-assembled and ready to install. Headers are offered in 14 models (2 to 15 loops) with 1 1/2 inch body offering a maximum flowrate of 31.5 gallons per minute....

See this product

CALTHERM PRO 1″ MANIFOLD

Calefactio’s stainless steel manifold kit is delivered pre-assembled and ready to install. Headers are offered in 14 models (2 to 15 loops) with a maximum flowrate of 31.5 gallons per minute (GPM). They come in pair...

See this product

CALTHERM TERA MANIFOLD

The Calefactio 2″ stainless steel manifold assembly includes two 304 stainless steel unions for system connection and is available in 8, 10, or 12 loop configurations, with a suggested maximum capacity of 38.4...

See this product

CALPEX-R (PEX-A) TUBING

Calefactio Calpex-R tubing are made of cross-linked polyethylene (PEX-A). They are designed for radiant heating systems and snow melting. They have an anti-oxygen barrier which limits the diffusion of oxygen in the...

See this product