New from Calefactio, CondenSAFE with pump for additional protection to the mechanical room.

Nouvelles

23 February 2021 | Published by Annick Marseille

In our mission to improve what’s best, we have taken into consideration that gravity is sometimes not on our side, so we have incorporated a water-resistant and dustproof pump into our Condensate Neutralizer to help pump neutralized water to the closest drain.
Our CondenSAFE pump is enclosed in an acid-resistant (≥ Ph3) nylon glass plastic housing, rated IP65. IP65 often referred to as International Protection Code, grades the level of protection offered by the casings against dust, and water intrusion. Our pump casing is presently UNIQUE in the market with this protection, making it ideal for dusty and humid mechanical rooms.
It is easy to install, quiet operation, and resistant to water temperatures up-to 158°F (70°C).
CondenSAFE pump Features:
 Waster resistant and dust-tight IP65 rating
 20ft of head
 Integrated check valve.
 Float for automatic-start & stop.
 7.2 ft (2.2 m) 3-Conductor Cable with a grounded 3-pin plug.

CondenSAFE neutralizer with pump (#CSNP20) can contain up to two media bags, suiting different heating device capacities.
Each media bag can treat condensate equivalent to 525 MBH (154 kWh) units, approximately 2,1 gallons (8 liters) per hour.

Calefactio media bags (#CSM2) are the only ones in the industry to have date labels, making it easy for the user to know when the media bag was installed when to change, and call for service.

Improving this unit even further, we have added an optional alarm panel to warn and prevent potential water damages to the mechanical room.
CondenSAFE neutralizer with pump comes with a 1 ft (30cm) 3-conductor cable where the alarm panel can easily be installed. Powered by 120V and with a 9V battery provides backup during power outages.

This multipurpose alarm (#CAL-AL120) can be used on a variety of applications i.e., septic tanks, sumps, holding tanks, pump chambers, water tanks, etc.
CondenSAFE with pump offers additional protection to any mechanical room.
For more information on this product visit our website site/condensafe.
For more information on this product press here
To locate your closest Calefactio distributor press here or send us an email @ info@calefactio.com

The importance of the precharge

Published by Annick Marseille - 24 July 2019

In systems using expansion tanks, it is utterly important that the tank has the same pressure than the system in static mode so it does not impact the capacity of the expansion tank. If the tank pressure is higher than the system : The air contained between the bladder and the shell will use more […]

Published by Mylène Dumoulin - 8 December 2021

Already 4 months have elapsed since the construction work started on our new head office, located at 30 rue Jean-Paul Cayer, in Blainville. A major project that will allow us to pursue our growth in the coming years, but also to offer more modern and larger living and working spaces for the wellness of our […]

Published by Annick Marseille - 25 September 2019

Plomberie Claude Boulet recently completed a 14 000 sq ft radiant heating project for Mini-Entrepôts St-Jean. The design and material supply was made in collaboration with Pier-Rick Rodier Rochefort from Empire Canada. In order to cover the whole heating demand of this surface, 12 000 ft of Calpex –R 5/8 and 7000 ft of Calpex-R ½ tubing were required, […]